Steps to Follow While Installing A HVAC System
A high-velocity HVAC system is a small duct airflow cooling, and heating system made to fit in space constricted structures. It is also chosen by home designers when there is no unique method to hide the cooling and heating system of the house. Click here for For more details on HVAC Services Toronto.
The HVAC system distributed air conditioning through tubing that is flexible and pre-insulated, which is placed through wall structures. The HVAC system also makes use of soundproof materials that make it provide a much more comfortable system. The soundproofing is possible because the system is made by materials that attenuate sound and absorb regenerated noise.
of the supply tubing and the plenum duct. Installation of the terminator outlets and sound attenuation tubing is followed, this is to prevent excess noise from emitting. The supply tubing is then applied onto the system to complete the component installation.
How to install HVAC system?
- Load calculation
The primary step to installing an HVAC system is to do a load calculation. A room-by-room load calculation must be done before the installation to prevent any load fluctuations after installation.
- Location for the fan coil unit
It is necessary to determine the location of the fan coil unit. The attic, garage or crawl space can be used as a location for the unit. The fan coil is available in two configurations – a horizontal cabinet and a vertical cabinet. If you opt to install the fan coil unit in the attic, it is essential also to install a secondary drain pan or float switch which is available in HVAC in Buckhead.
- Return opening of air
Next is the cutting of the return air opening. It is best to locate the return air opening from locations other than the dining room, living room and kitchen. Once the opening is cut, the fan coil can be passed through the opening.
- Install all the components
The next step on how to install HVAC is installing the necessary components of the system. This involves the installation of the plenum ring below the fan coil. Then the condensate drain must be connected to the fan coil unit.
The next process on how to install the HVAC unit is connecting the refrigerant lines from the outdoor condensing unit. This is followed by the connection of the supply tubing and the plenum duct. Installation of the terminator outlets and sound attenuation tubing is followed, this is to prevent excess noise from emitting. The supply tubing is then applied onto the system to complete the component installation.
- Test and inspection
The final step is checking whether is system is installed correctly. Check for leaks and electrical connections.
If you are looking for a new HVAC system looking for HVAC in Buckhead to get the right system installation in the region. Click here for For more details on HVAC Companies Toronto
